RadioLabs - Wireless 1-Watt Amplifier

2.4 Amplifier || Wireless

Commercial Inline Amplifier - 2.4 GHz Wireless Amplifier
RadioLabs is now offering a high-quality, weatherproof 1 Watt Inline Amplifier. This amplifier is a great addition to an antenna for for an extreme performance boost, and is perfectly paired with our omni antennas.

Features

Bi-directional amplifier for IEEE 802.11B/G and Super G Dual Band compatible.
Rugged outdoor aluminum housing.
Automatic gain control to minimize the signal distortion
Wide transmit input level, +5dBm to +20dBm
Low noise amplifier with system noise figure 3.5 dB
Universal 110/220 AC auto switching ACm
Adapter for 6V DC power injector
DC power injector equipped with lighting protection
Industrial standard N-Female type connector
Outdoor all weather-proof enclosure

Amplifier Installed on Omni Antenna
Antenna not included

Commercial Grade, 1-Watt Inline Wireless Amplifier. Weatherproof -
Simple installation

RadioLabs is pleased to offer a 1 Watt amplifier designed to attach directly to a WiFi antenna. The 1 Watt Inline Amplifier can be directly mounted to any antenna that has a N-Female connector, and is great for installation with our Omni antennas. Just attach the 1 Watt Inline Amplifier to the base of the Omni antenna and our mounting sleeve slides right over it for even more protection.

The 1 Watt Inline Amplifier is designed for outdoor installations, so it does extremely well in dealing with the elements. The amplifier has a weatherproof machined enclosure, and the DC Injector housing is made from machined aluminum with an Anodized finish.

The RadioLabs 1 Watt Inline Amplifier only requires 2 cables for installation. This is the least amount of cables needed for any 1 Watt wireless amplifier. You only need to connect your router/access point/repeater/bridge to the dc injector, and connect the dc injector to the amplifier and the amplifier directly attaches to the antenna. Power up the DC injector with the supplied adapter and installation is complete

All Buffalo products currently offered on RadioLabs site, and the majority of consumer grade wireless equipment, will work with any amplifier currently listed on our site.

Amplifiers cannot be used with RadioLabs Long Range Notebook Cards High Power, Access Points, or any wireless device generating more than 30mW output. These products will burn out the amplifier, and will void all warranties

Back to WiFi Home

View all the WiFi Amplifiers

Click here to see a hook-up diagram of this amplifier.

Note: Coaxial cables are not included. For cable information, please go here



Seed - USB WiFi Adapter \|\| High Power

The Seed! - The easiest and most economical way to make any PC with a USB port wireless. Powered completely by your computer, the Seed is a completely self-sufficient Wi-Fi adapter, which, by itself, will pull in more signals than most other USB Wifi devices in it's price range. Use the Seed by itself, or connect our high gain antennas or amplifiers to pull in signals from farther away then you ever thought possible! More...

Coax Seal

Coax Seal is used to keep your coax connection on your external antenna weatherproof. Coax Seal is a "tape like" material which you simply wrap around the coax connector on all outside antenna connections. More...

nRage - 802.11n - Mimo Booster Amplifier

On Sale - The RadioLabs nRage-500 is a new way to boost your 802.11n wireless router, access point or wireless card. With a simple installation requiring only two connections and no extra software to install and up to 15 times the power of most N-series and MIMO equipment, the nRage-500 is the one of the easiest to install and most powerful 802.11n amplifiers on the market More...

20 ft WiFi Antenna Cable

RadioLabs offers a full line of pre-made cables for your 802.11 installation. We have pre-made cables or you can have us custom make a cable for your specific application. More...

Vertical Omni-Directional 8 db WiFi Antenna

This high gain wireless LAN antenna is the perfect blend of performance and compact size. You can easily mount it provide a tremendous boost to the wireless range of your 802.11 router, hot spot, or access point. More...

Model # WAI24

1-Watt Commercial Inline Amplifier

Operating Conditions

Operating
Temperature Range

Normal: -10°C ~ +50°C
Extreme: -40°C ~ +70°C

Operating
Humidity

5% to 100% RH

Storage Temperature

-40°C ~ +90°C

Supply Voltage

AC 100V~240V adapter
50/60Hz DC 6V/1A (Supplied)

Electrical Conditions

Access Method

DS/TDD

Operating Frequency

2.4GHz ~ 2.5GHz

Spurious Emission

30MHz ~ 1 GHz : -36dBm(max.)
1GHz ~ 12.75 GHz : - 30dBm(max.)

Transmitter Specifications

Tx output power variation

25°C: 30dBm ±1dB(Pin=13dBm)
-30°C: 30dBm ±2dB(Pin=13dBm)
70°C: 30dBm ±2dB(Pin=13dBm)

Tx output power vs. Input
Power

30dBm ±1dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)
30dBm ±2dB(Pin=7~20dBm)

Tx ACPR ±11MHz

-30°C ~ +70°C: 30dBc (max.)

TX on/off control time

30°C ~ +70°C: 5us (max.)

Receiver Specifications

Rx Gain

-30°C ~ +70°C: 10dB(min.)

Rx Gain Flatness

25°C: ±1dB
-30°C: ±2dB
70°C: ±2dB

Rx Noise Figure

-30°C ~ +70°C: 3.5dBm (max.)

Rx Third Intercept Point

-30°C ~ +70°C: 30dBm (max.)

Rx Return Loss

-30°C ~ +70°C: 14dB(min.)

Rx on/off control timing

-30°C ~ +70°C: 2us (max.)

Current Consumption

Tx Current

1000mA (max.): -30°C ~ +70°C

Rx Current

130mA (max.): -30°C ~ +70°C

Package Contents

1. 1-W Booster Amplifier
2. AC Power Adapter
3. DC Power Injector

Item # WAI24
Price: $299.95

Share |

Click here to check your order status

Join the RadioLabs mailing list :
Your information is kept private and only used for our newsletter.

More Information

RadioLabs and RadioLabs.com are copyright. The contents of these webpages are © RadioLabs International Inc., 2003-2010. All rights reserved. If you experience any problems with our site, please contact our webmaster

Commercial Inline Amplifier - 2.4 GHz Wireless Amplifier RadioLabs is now offering a high-quality, weatherproof 1 Watt Inline Amplifier. This amplifier is a great addition to an antenna for for an extreme performance boost, and is perfectly paired with our omni antennas.

Commercial Inline Amplifier - 2.4 GHz Wireless Amplifier
RadioLabs is now offering a high-quality, weatherproof 1 Watt Inline Amplifier. This amplifier is a great addition to an antenna for for an extreme performance boost, and is perfectly paired with our omni antennas.